Sorell Queen Gas Lift Bed Frame - Beige
- Fits a standard 153 x 203 cm queen mattressThe supplier names the queen mattress size, so bedding can be ordered to match.
- 27.5 cm internal storage depthThe box takes spare duvets, pillows and soft luggage.
- Split-panel 104 cm headboardTwo soft padded sections 75 cm tall and 8 cm thick.
Description
The Sorell is a queen gas lift bed frame upholstered in beige fabric, with a headboard split into two soft panels and a bent-slat platform that lifts to open the storage box underneath. Assembled it measures 220 x 169.5 x 104 cm, with a 75 cm headboard panel 8 cm thick and base sides 29.5 cm tall. Twenty-six bent wooden slats sit on two iron tube centre supports, the base is finished with non-woven fabric, and the frame is rated to 210 kg. It ships in two 23 kg cartons with a manual; the mattress is sold separately.

Will the bed fit your room?
Check the complete frame size—not only the mattress size—before ordering.
- Overall length
- 220 cm
- Overall width
- 169.5 cm
- Headboard height
- 104 cm
Fits a standard 153 x 203 cm queen mattress. The assembled frame is 220 x 169.5 x 104 cm and the base sides stand 29.5 cm high. Allow swing room at the foot end for the platform to lift.
Gas lift storage under the whole mattress
The bent-slat platform lifts on gas struts to open a storage box about 27.5 cm deep that runs the full area under the mattress. The base is finished with non-woven fabric underneath.
Mattress compatibility
Mattress size
Fits a standard 153 x 203 cm queen mattress.
Slat base carries the mattress
The bent wooden slat platform supports the mattress directly, so it can go straight onto the frame.
Room clearance
The frame occupies 220 x 169.5 cm of floor, plus swing room at the foot end when the base is open.
Materials & support
Beige fabric upholstery
The headboard, side panels and base are upholstered in beige fabric.
Split-panel headboard
The headboard is 75 cm tall and 8 cm thick, divided into two soft padded sections, reaching 104 cm from the floor.
Twenty-six bent slats
Two rows of thirteen bent wooden slats span the platform and flex under the mattress.
Two iron tube centre supports
Two iron tubes run under the slats down the middle of the platform.
MDF and wood frame
The frame is built from medium density fibreboard and wood under the upholstery.
Rated to 210 kg
The supplier states a 210 kg weight capacity for the assembled frame.
Product specifications
- Bed size
- Queen
- Mattress fit
- 153 x 203 cm queen mattress
- Assembled size
- 220 x 169.5 x 104 cm
- Headboard height
- 104 cm from floor (75 cm panel, 8 cm thick)
- Internal storage depth
- Approx. 27.5 cm
- Base side height
- 29.5 cm
- Base type
- Gas lift storage base with bent wooden slats
- Slats
- 13 x 2 bent wooden slats
- Centre supports
- 2 iron tubes
- Load rating
- 210 kg
- Frame material
- Medium density fibreboard and wood
- Base lining
- Non-woven fabric
- Colour
- Beige
- Product weight
- 40 kg
- Cartons
- 2 cartons, 23 kg each
- Assembly
- Assembly required, manual included
Delivery & assembly
Arrives in two cartons
Carton A is 171 x 132 x 11.5 cm at 23 kg and carton B is 211 x 30 x 18.5 cm at 23 kg. The 132 cm width and the 211 cm length are the figures to check against doorways and stair turns.
Assembly required
The headboard joins the base on site with the included manual. Two people make the sprung platform easier to hold while the struts are fitted.
Mattress sold separately
This listing covers the bed frame only.
Questions before you buy
What mattress size fits the Sorell queen gas lift bed frame?
A standard 153 x 203 cm queen mattress, the size named by the supplier. Order queen sheets and a queen duvet to match; the mattress is sold separately.
How deep is the Sorell storage box?
About 27.5 cm inside, running the full area under the mattress. The base is finished with non-woven fabric, which keeps stored bedding off the floor.
How many slats does the Sorell queen have?
Twenty-six bent wooden slats, set as two rows of thirteen, carried on two iron tube centre supports that run down the middle of the platform.
What weight does the Sorell frame carry?
210 kg, stated by the supplier for the assembled frame. The bent slats and the two iron tubes spread that load across the platform.
How much floor space does the Sorell queen need?
220 x 169.5 cm, which is generous for a queen. Add walking space on the sides you use and clear access at the foot end for the lift.
How is the Sorell delivered?
In two cartons weighing 23 kg each, with an assembly manual. Carton A is 132 cm wide and carton B is 211 cm long, so check the access route.
Warranty & returns
2-Year Structural Warranty
Structural cover from delivery, for normal home use.
See warranty cover30-day change of mind
Shop with 30-day change-of-mind returns. Return freight is at your cost; conditions apply.
See return conditionsHere to help
Our team is here for product questions and after-sales support.
Contact our team


















