Minto Single Wooden House Bed Frame - Oak
- Fits a standard 92 x 188 cm single mattressThe mattress size is stated, so bedding can be ordered to match.
- Low floor bed heightThe slat base sits just above the floor, so a young child can climb in unaided.
- Guardrails 30 cm above the slatsTimber rails run along the sides to keep the mattress and sleeper in place.
Description
The Minto is a single house bed in pine and plywood with an oak finish, built low to the floor inside a pitched house frame with crossed roof finials. The assembled frame measures 197 x 100 x 166.5 cm, with the side posts 93 cm to the eave and guardrails standing 30 cm above the slat base. It fits a standard 92 x 188 cm single mattress and the low sleeping height suits a child moving out of a cot. It ships flat-packed in one carton weighing 30 kg; the mattress is sold separately.
Will the bed fit your room?
Check the complete frame size—not only the mattress size—before ordering.
- Overall length
- 197 cm
- Overall width
- 100 cm
Fits a standard 92 x 188 cm single mattress. The assembled house frame is 197 x 100 cm on the floor and 166.5 cm tall at the roof apex, with the eaves at 93 cm. Check ceiling height and any light fitting above the bed position.
Mattress compatibility
Mattress size
Fits a standard 92 x 188 cm single mattress.
Slat base carries the mattress
The plywood slat base supports the mattress directly, so it can go straight onto the frame.
Ceiling clearance
The frame stands 166.5 cm tall at the apex, so allow height for a ceiling light or a sloping ceiling above the bed.
Materials & support
Pine and plywood house frame
Four pine posts carry a pitched roof frame with crossed finials above the bed.
Oak tone finish
The timber is finished in a light oak tone that suits a natural-wood nursery.
Timber guardrails
Slatted guardrails stand 30 cm above the slat base, or 36 cm from the floor.
Low floor-level base
The slat base sits close to the floor rather than on tall legs.
Eaves at 93 cm
The side posts meet the roof at 93 cm above the floor.
Flat-pack assembly
The posts, rails, roof and slats bolt together on site.
Product specifications
- Bed size
- Single
- Mattress fit
- 92 x 188 cm single mattress
- Assembled size
- 197 x 100 x 166.5 cm
- Overall height
- 166.5 cm to the roof apex
- Eave height
- 93 cm
- Guardrail height
- 30 cm above the slat base (36 cm from the floor)
- Base type
- Plywood slat base, floor level
- Material
- Pine wood and plywood
- Colour
- Oak
- Product weight
- 27.5 kg
- Carton
- 1 carton, 198 x 27.5 x 20 cm, 30 kg
- Assembly
- Assembly required
Delivery & assembly
Arrives in one carton
A single carton of 198 x 27.5 x 20 cm weighing 30 kg. The 198 cm length is the figure to check against stair turns and lift depth.
Assembly required
The posts, guardrails, roof frame and slats bolt together on site. Two people make the roof section easier to align.
Mattress sold separately
This listing covers the bed frame only.
Questions before you buy
What mattress size fits the Minto single house bed in oak?
A standard 92 x 188 cm single mattress, resting on the plywood slat base near the floor. Order single sheets and a single duvet to match.
How high are the guardrails on the oak Minto?
30 cm above the slat base, or 36 cm measured from the floor. They run along the sides of the frame to keep the mattress and the sleeper in place.
How low is the sleeping height on the oak Minto?
The slat base sits close to the floor rather than on legs, which lets a young child climb in and out unaided and keeps any fall short.
How tall is the oak Minto house frame?
166.5 cm at the roof apex with the eaves at 93 cm. Measure the ceiling height at the exact bed position, including any pendant light.
What is the oak Minto made from?
Pine wood posts and rails with a plywood slat base, finished in a light oak tone.
How does the oak Minto arrive?
In one flat-packed carton measuring 198 x 27.5 x 20 cm and weighing 30 kg, with assembly required on site.
Warranty & returns
2-Year Structural Warranty
Structural cover from delivery, for normal home use.
See warranty cover30-day change of mind
Shop with 30-day change-of-mind returns. Return freight is at your cost; conditions apply.
See return conditionsHere to help
Our team is here for product questions and after-sales support.
Contact our team