Upgrade Your Sleep · NZ-wide delivery on beds & mattresses

Lylo Queen Gas Lift Bed Frame - Linen Beige

SKULT11066
Availabilityin stock

$469.00$509.00
Tax included.Shipping calculated at checkout.
Size guide
  • Fits a standard 153 x 203 cm queen mattressThe supplier names the mattress size, so bedding can be ordered to match.
  • Gas lift storage baseThe platform lifts to 122 cm and holds open while the box is loaded.
  • 205 x 154.5 cm storage boxThe compartment runs the full area under the mattress.
In stock — ships from our Auckland warehouse
Most orders ship the next business day
30-day change of mind returns Terms apply
2-Year Structural Warranty What’s covered
Check shipping cost

Description

The Lylo is a queen gas lift bed frame upholstered in cotton linen fabric, with a tall shaped headboard and a slat platform that lifts on gas struts to open the storage box beneath. Assembled it measures 219.5 cm long, 166 cm across the headboard and 115.5 cm to the top of the headboard, and the supplier states it takes a 203 x 153 cm queen mattress. Twenty-six medium density fibreboard slats sit on an iron centre support, and the frame is rated to a maximum 210 kg. It ships in two cartons of 24.5 kg and 23.5 kg with a manual; the mattress is sold separately.

Lylo Queen Gas Lift Bed Frame - Linen Beige

Will the bed fit your room?

Check the complete frame size—not only the mattress size—before ordering.

Overall length
219.5 cm
Overall width
166 cm
Headboard height
115.5 cm

Fits a standard 153 x 203 cm queen mattress. The assembled frame is 219.5 x 166 x 115.5 cm, with the 166 cm measured across the headboard — the widest point. The body of the base is 163 cm wide. Allow about 122 cm of height at the foot end for the platform to swing up.

Gas lift storage under the whole mattress

The slat platform lifts on gas struts to open a storage box measuring 205 x 154.5 cm, which runs the full area under the mattress. The base of the box is finished in non-woven fabric and the sides stand 29.5 cm tall.

    Mattress compatibility

    Mattress size

    Fits a standard 153 x 203 cm queen mattress on a 205 x 154.5 cm platform.

    Slat base carries the mattress

    The fibreboard slat platform supports the mattress directly, so it can go straight onto the frame.

    Room clearance

    The frame occupies 219.5 x 166 cm of floor, plus 122 cm of height at the foot end when the base is open.

    Materials & support

    • Cotton linen upholstery

      The headboard, side panels and base are upholstered in cotton linen fabric in a beige tone.

    • Shaped upholstered headboard

      The headboard is a single shaped panel with a soft curved top edge, reaching 115.5 cm from the floor.

    • Twenty-six fibreboard slats

      Twenty-six medium density fibreboard slats span the platform and carry the mattress directly.

    • Iron centre support

      An iron centre support structure runs under the slats down the middle of the platform.

    • Rated to 210 kg

      The supplier states a maximum supported weight of 210 kg.

    • Non-woven storage base

      The floor of the storage box is lined with non-woven fabric.

    Product specifications

    Bed size
    Queen
    Mattress fit
    203 x 153 cm queen mattress
    Assembled size
    219.5 x 166 x 115.5 cm
    Base body width
    163 cm
    Headboard height
    115.5 cm from floor
    Storage box size
    205 x 154.5 cm
    Box side height
    29.5 cm
    Open lift height
    122 cm
    Slats
    26 medium density fibreboard slats
    Centre support
    Iron structure
    Maximum supported weight
    210 kg
    Upholstery
    Cotton linen fabric
    Colour
    Linen Beige
    Product weight
    42.5 kg
    Cartons
    2 cartons, 24.5 kg and 23.5 kg
    Assembly
    Assembly required, approximately 3 to 4 hours

    Delivery & assembly

    Arrives in two cartons

    Carton A is 169.5 x 117 x 11.5 cm at 24.5 kg and carton B is 211.5 x 30 x 19.5 cm at 23.5 kg. Measure doorways, stairwells and lifts against the 211.5 cm carton.

    Allow 3 to 4 hours to assemble

    The supplier estimates three to four hours with the included manual. Two people make the sprung platform easier to hold while the struts are fitted.

    Mattress sold separately

    This listing covers the bed frame only.

    Questions before you buy

    What mattress size fits the Lylo queen gas lift bed frame?

    A 203 x 153 cm queen mattress, the size named by the supplier. The storage platform measures 205 x 154.5 cm, leaving a small margin so the mattress drops in and sits flat.

    How big is the storage under the Lylo base?

    The box measures 205 x 154.5 cm with sides 29.5 cm tall, running the full area under the mattress. That takes spare duvets, pillows, soft luggage and out-of-season bedding.

    How much headroom does the Lylo base need to open?

    About 122 cm above the floor at the foot end when the platform is fully raised. Check for a low window sill, a sloping ceiling or a shelf above the bed.

    What weight does the Lylo frame support?

    A maximum of 210 kg, stated by the supplier. Twenty-six fibreboard slats and an iron centre support structure carry that load across the platform.

    How much floor space does the Lylo queen frame need?

    The assembled frame occupies 219.5 x 166 cm, with the 166 cm measured across the headboard. The base itself is 163 cm wide.

    How long does the Lylo take to assemble?

    The supplier estimates three to four hours with the included manual. The frame arrives in two cartons weighing 24.5 kg and 23.5 kg.

    Warranty & returns

    2-Year Structural Warranty

    Structural cover from delivery, for normal home use.

    See warranty cover

    30-day change of mind

    Shop with 30-day change-of-mind returns. Return freight is at your cost; conditions apply.

    See return conditions

    Here to help

    Our team is here for product questions and after-sales support.

    Contact our team

    Customer Reviews

    Be the first to write a review
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)