Lifteo Teddy Boucle Double Gas Lift Bed Frame - White
- Fits a 138 x 188 cm double mattressThe mattress size is stated, so bedding and a mattress can be ordered to match.
- Soft white teddy boucleA dense curled pile that reads warmer than a flat white fabric.
- 28 cm deep storage boxThe gas lift deck opens storage across the footprint of the base.
Description
The Lifteo teddy boucle double in white is a gas lift storage bed frame upholstered in soft teddy boucle over an MDF frame. It fits a 138 x 188 cm double mattress. Assembled it measures 201.5 cm long and 156 cm across the headboard, standing 80.5 cm from the floor, with the upholstered base 148.5 cm wide and 30 cm high. Twenty-six MDF slats on three metal centre support bars carry the mattress, and the deck lifts to open a storage box marked at 28 cm deep with a non-woven fabric base. The frame is rated to 210 kg, arrives in two cartons and weighs 36 kg assembled; the mattress is sold separately.
Will the bed fit your room?
Check the complete frame size—not only the mattress size—before ordering.
- Overall length
- 201.5 cm
- Overall width
- 156 cm
- Headboard height
- 80.5 cm
Fits a 138 x 188 cm double mattress. The assembled frame is 201.5 cm long and 156 cm wide at the headboard, standing 80.5 cm from the floor; the upholstered base is 148.5 cm wide.
Gas lift storage box
The slat deck is hinged at the head end and lifts on gas struts, opening a storage box underneath. The dimension drawing marks the box at 28 cm deep inside a base 30 cm high, and a non-woven fabric panel forms the floor of the storage area.
Mattress compatibility
Mattress size
Fits a 138 x 188 cm double mattress.
Mattress support
Twenty-six MDF slats on three metal centre bars carry the mattress directly.
Room clearance
The frame occupies 201.5 x 156 cm, and the foot end needs clear floor for the deck to lift.
Materials & support
Teddy boucle upholstery
Soft white teddy boucle fabric wraps the headboard, side rails and storage base.
MDF frame
An MDF frame carries the upholstered panels and the storage box.
26 MDF slats
Twenty-six MDF slats span the base and support the mattress directly.
Three metal centre bars
Three metal centre support bars run beneath the slats along the length of the bed.
Padded headboard
The headboard is a clean padded panel 52 cm tall and 156 cm wide.
Non-woven storage base
A non-woven fabric panel forms the floor of the storage box.
Product specifications
- Bed size
- Double
- Mattress fit
- 138 x 188 cm double mattress
- Frame length
- 201.5 cm
- Headboard width
- 156 cm
- Base width
- 148.5 cm
- Overall height
- 80.5 cm
- Headboard panel height
- 52 cm
- Base height
- 30 cm
- Storage depth
- 28 cm
- Storage type
- Gas lift
- Slats
- 26 MDF slats on three metal centre bars
- Weight capacity
- 210 kg
- Material
- Teddy boucle fabric, MDF, metal, plastic, non-woven fabric
- Colour
- White
- Assembled weight
- 36 kg
- Cartons
- 2
- Assembly time
- Estimated 3 hours
Delivery & assembly
Arrives in two cartons
Carton A measures 159 x 108 x 9 cm at 18 kg and Carton B measures 196 x 31 x 19 cm at 22 kg. Measure your access route against the 196 cm carton.
Assembled weight
The finished frame weighs 36 kg, so decide where it will sit before you start building.
Assembly
Assembly is estimated at three hours and an assembly manual is packed with the frame.
Questions before you buy
What mattress fits the Lifteo teddy boucle double in white?
A 138 x 188 cm double mattress. The slat deck is built to New Zealand double size and sits inside the upholstered base. The mattress is sold separately.
How does teddy boucle differ from plain boucle?
Teddy boucle has a denser, shorter curled pile, so it feels closer to a sherpa fleece to the hand while keeping the looped surface that stops white reading as flat.
How deep is the storage under the white Lifteo double?
28 cm on the dimension drawing, inside a base 30 cm high, running the 201.5 x 148.5 cm footprint with a non-woven fabric floor.
What stops the slat deck flexing?
Three metal centre support bars run the length of the base beneath the 26 MDF slats, which is what carries the 210 kg rating.
How tall is this bed at the headboard?
80.5 cm from the floor, with the padded panel accounting for 52 cm of that. It stays below most bedside lamp shades.
How long should assembly take?
The supplier estimates three hours. The gas struts go on last, once the base has been squared up and the slat deck is in place.
What is in the delivery for this frame?
Two cartons, 159 x 108 x 9 cm at 18 kg and 196 x 31 x 19 cm at 22 kg, holding the double frame and an assembly manual.
Warranty & returns
2-Year Structural Warranty
Structural cover from delivery, for normal home use.
See warranty cover30-day change of mind
Shop with 30-day change-of-mind returns. Return freight is at your cost; conditions apply.
See return conditionsHere to help
Our team is here for product questions and after-sales support.
Contact our team