Lifteo Boucle Double Gas Lift Bed Frame - Beige
- Fits a 138 x 188 cm double mattressThe mattress size is stated, so bedding and a mattress can be ordered to match.
- 28 cm deep storage boxThe gas lift deck opens storage across the footprint of the base.
- 26 MDF slats on three centre barsThree metal support bars run under the slats for extra rigidity.
Description
The Lifteo double is a gas lift storage bed frame upholstered in soft beige boucle over an MDF timber frame. It fits a 138 x 188 cm double mattress. Assembled it measures 201.5 cm long and 156 cm across the headboard, standing 80.5 cm from the floor, with the upholstered base 148.5 cm wide and 30 cm high. Twenty-six MDF slats on three metal centre support bars carry the mattress, and the deck lifts to open a storage box marked at 28 cm deep with a non-woven fabric base. The frame is rated to 210 kg, arrives in two cartons and weighs 36 kg assembled; the mattress is sold separately.
Will the bed fit your room?
Check the complete frame size—not only the mattress size—before ordering.
- Overall length
- 201.5 cm
- Overall width
- 156 cm
- Headboard height
- 80.5 cm
Fits a 138 x 188 cm double mattress. The assembled frame is 201.5 cm long and 156 cm wide at the headboard, standing 80.5 cm from the floor; the upholstered base is 148.5 cm wide.
Gas lift storage box
The slat deck is hinged at the head end and lifts on gas struts, opening a storage box underneath. The dimension drawing marks the box at 28 cm deep inside a base 30 cm high, and a non-woven fabric panel forms the floor of the storage area.
Mattress compatibility
Mattress size
Fits a 138 x 188 cm double mattress.
Mattress support
Twenty-six MDF slats on three metal centre bars carry the mattress directly.
Room clearance
The frame occupies 201.5 x 156 cm, and the foot end needs clear floor for the deck to lift.
Materials & support
Boucle upholstery
Soft beige boucle fabric wraps the headboard, side rails and storage base.
MDF timber frame
An MDF timber frame carries the upholstered panels and the storage box.
26 MDF slats
Twenty-six MDF slats span the base and support the mattress directly.
Three metal centre bars
Three metal centre support bars run beneath the slats along the length of the bed.
Padded headboard
The headboard is a clean padded panel 52 cm tall and 156 cm wide.
Non-woven storage base
A non-woven fabric panel forms the floor of the storage box.
Product specifications
- Bed size
- Double
- Mattress fit
- 138 x 188 cm double mattress
- Frame length
- 201.5 cm
- Headboard width
- 156 cm
- Base width
- 148.5 cm
- Overall height
- 80.5 cm
- Headboard panel height
- 52 cm
- Base height
- 30 cm
- Storage depth
- 28 cm
- Storage type
- Gas lift
- Slats
- 26 MDF slats on three metal centre bars
- Weight capacity
- 210 kg
- Material
- Boucle fabric, MDF, metal, plastic, non-woven fabric
- Colour
- Beige
- Assembled weight
- 36 kg
- Cartons
- 2
- Assembly time
- Estimated 3 hours
Delivery & assembly
Arrives in two cartons
Carton A measures 159 x 108 x 9 cm at 18 kg and Carton B measures 196 x 31 x 19 cm at 22 kg. Measure your access route against the 196 cm carton.
Assembled weight
The finished frame weighs 36 kg, so decide where it will sit before you start building.
Assembly
Assembly is estimated at three hours and an assembly manual is packed with the frame. Allow clear floor space while the gas struts are fitted.
Questions before you buy
What mattress size fits the Lifteo boucle double?
A 138 x 188 cm double mattress. The slat deck is built to New Zealand double size and sits inside the upholstered base. The mattress is sold separately.
How deep is the storage box on the Lifteo double?
The dimension drawing marks it at 28 cm deep inside a base 30 cm high, running the footprint of the bed, which suits folded bedding and flat storage bags.
How many slats does the Lifteo double have?
Twenty-six MDF slats, carried on three metal centre support bars that run the length of the base and stop the deck flexing under load.
What weight is the Lifteo double rated to?
210 kg maximum, which covers two adults plus a double mattress and bedding.
How tall is the Lifteo double headboard?
The padded panel is 52 cm tall and 156 cm wide, bringing the bed to 80.5 cm from the floor at the top of the headboard.
How long does the Lifteo double take to assemble?
The supplier estimates three hours. An assembly manual is packed with the frame, and the gas struts are fitted last once the base is square.
How is the Lifteo double packed?
In two cartons: 159 x 108 x 9 cm at 18 kg, and 196 x 31 x 19 cm at 22 kg, plus an assembly manual.
Warranty & returns
2-Year Structural Warranty
Structural cover from delivery, for normal home use.
See warranty cover30-day change of mind
Shop with 30-day change-of-mind returns. Return freight is at your cost; conditions apply.
See return conditionsHere to help
Our team is here for product questions and after-sales support.
Contact our team