Bram 3 Door Wardrobe Cabinet - White

Five shelves sit alongside the hanging section in the Bram 3 Door Wardrobe Cabinet, taking folded T-shirts, pants and knitwear that would crease on a hanger. An extra top storage area is intended for bedding, sheets and towels. That combination means one 120cm cabinet can replace a wardrobe and a linen cupboard.

120cm of wall width and 52cm of depth is what the Bram 3 Door Wardrobe Cabinet occupies, standing 190cm tall. Allow swing room in front for three hinged doors. Skirting boards can hold the carcass a few centimetres off the wall, so measure to the skirting rather than to the plaster line.

190cm leaves roughly half a metre of clearance under a standard 2.4m ceiling, so the Bram 3 Door Wardrobe Cabinet fits most bedrooms comfortably. The height matters more during assembly than after: the carcass is built flat and then stood up, so you need enough diagonal room to tilt it upright.

Particle board with melamine construction, an MDF panel and metal alloy components make up the Bram 3 Door Wardrobe Cabinet, finished in white melamine. Aluminium alloy is used for the handle and hanging rail. The melamine surface cleans with a damp cloth, which keeps a white wardrobe looking even over time.

Two cartons carry this wardrobe: 189.5cm x 56cm x 12.5cm at 57.9kg and 199.5cm x 56.5cm x 8cm at 38.7kg. At nearly 58kg the heavier carton needs at least two people, and both are close to two metres long. Measure your stairwell, lift and hallway turns before delivery.

92kg is the assembled weight of the Bram 3 Door Wardrobe Cabinet, the combined mass of a 120cm x 52cm x 190cm carcass, three doors and five shelves. Practically, that means building it in its final position, because it is not a piece you will slide across the room afterwards. Check the floor is level first.