Augusta King PU Bed Frame - Black
- Fits a standard king mattress - A 167 x 203 cm king mattress rests on the timber slat base.
- 28.5 cm under-bed clearance - Flat storage boxes slide beneath the frame.
- 96 cm waffle-tufted headboard - The panel is padded with high density foam and wrapped in the same black PU as the frame.
Description
The Augusta King PU Bed Frame is an upholstered king bed finished in black PU faux leather, with a waffle-tufted headboard 96 cm high and a base 220 cm long by 176 cm wide. Flexible timber slats sit on metal beams and struts and carry the mattress directly. It fits a standard 167 x 203 cm king mattress, which is purchased separately. The frame weighs 38 kg and arrives flat-packed in two cartons for assembly at home.
Will the bed fit your room?
Check the complete frame size—not only the mattress size—before ordering.
- Overall length
- 220 cm
- Overall width
- 176 cm
- Headboard height
- 96 cm
Fits a standard 167 x 203 cm king mattress. The assembled frame measures 220 x 176 cm with a 96 cm headboard.
Mattress compatibility
Mattress size
Fits a standard 167 x 203 cm king mattress.
No box spring needed
The timber slat base carries the mattress directly.
Room clearance
The assembled frame occupies 220 x 176 cm of floor area.
Materials & support
PU faux leather upholstery
The headboard and side rails are upholstered in black PU faux leather, which wipes clean with a damp cloth.
Waffle-tufted headboard
The 96 cm headboard is padded with high density foam in a waffle pattern.
Metal beams and struts
Metal beams and struts run under the slat base to spread the load.
Flexible timber slats
Timber slats span the frame and flex under the weight of the mattress.
Short wooden legs
The frame stands on short wooden legs about 5 cm high, keeping the bed low.
Product specifications
- Bed size
- King
- Mattress fit
- 167 x 203 cm king mattress
- Assembled frame
- 220 x 176 cm
- Frame height
- 29 cm
- Headboard height
- 96 cm
- Under-bed clearance
- 28.5 cm
- Leg height
- 5 cm
- Base type
- Timber slat base on metal beams
- Frame weight
- 38 kg
- Materials
- PU faux leather, metal, high density foam, wood
- Colour
- Black
- Cartons
- 2 cartons - 177.5 x 94.5 x 12.5 cm (22.5 kg) and 211 x 30 x 21.5 cm (22 kg)
- Assembly
- Required
Delivery & assembly
Arrives in two cartons
Carton one measures 177.5 x 94.5 x 12.5 cm at 22.5 kg; carton two measures 211 x 30 x 21.5 cm at 22 kg.
Check the access route
The longer carton is 211 cm, so measure stairwells, lift doors and tight corners before delivery day.
Assembly on site
Assemble the frame in the room where it will stand and keep clear floor space around it while you work.
Questions before you buy
What mattress size fits the Augusta King PU bed frame?
A standard 167 x 203 cm king mattress fits the slat base. The mattress is bought separately from the frame.
How much floor space does the Augusta king frame need?
The assembled frame occupies 220 x 176 cm and the headboard reaches 96 cm high. Allow extra room to walk around the sides and to make the bed.
What supports the mattress on this king frame?
Flexible timber slats spanning metal beams and struts carry the mattress directly, so a box spring is not needed.
How much clearance is there under the Augusta king bed?
There is 28.5 cm between the floor and the underside of the frame, which suits flat under-bed storage boxes.
Which materials is the Augusta King PU bed frame made from?
PU faux leather over high density foam on the headboard and rails, a metal beam and strut frame, timber slats and short wooden legs.
How does the Augusta king bed frame arrive?
In two cartons measuring 177.5 x 94.5 x 12.5 cm at 22.5 kg and 211 x 30 x 21.5 cm at 22 kg. Assembly is required.
Warranty & returns
2-Year Structural Warranty
Structural cover from delivery, for normal home use.
See warranty cover30-day change of mind
Shop with 30-day change-of-mind returns. Return freight is at your cost; conditions apply.
See return conditionsHere to help
Our team is here for product questions and after-sales support.
Contact our team