Upgrade Your Sleep · NZ-wide delivery on beds & mattresses

Lina Armchair - Light Grey

SKULT11006
Availabilityin stock

$149.00$169.00
Tax included.Shipping calculated at checkout.
Size guide
  • 79 cm back heightsupport that reaches the shoulders, not just the mid-back
  • Natural rubberwood legsa hardwood base rather than a metal or plastic one
  • 64 × 68 cm footprinta corner chair, not a room-filler
In stock — ships from our Auckland warehouse
Most orders ship the next business day
30-day change of mind returns Terms apply
Covered by warranty — see the period for this category
Check shipping cost

Description

The Lina is the plain-spoken one: light grey fabric, a supportive backrest and natural rubberwood legs, in a 64 cm wide by 68 cm deep footprint that fits a bedroom corner or a study nook. At 79 cm tall the back sits high enough to carry your shoulders rather than stopping at the waist, and the whole chair weighs 9 kg, so it moves when the room changes use.

Lina Armchair - Light Grey

A corner-sized chair with a full-height back

64 W × 68 D × 79 H cm

Sixty-four centimetres across and 68 cm deep is close to square, which makes the Lina simple to place — it behaves the same whether you turn it into a corner at an angle or square it against a wall.

The 79 cm height is what separates it from the low accent chairs: that back is taller than a dining chair, so the Lina holds its own beside a bed or a desk rather than looking like a spare seat. Allow 75 cm of wall and 40 cm in front.

Lina Armchair - Light Grey

Padded seat, supportive backrest

Comfort on the Lina comes from a padded seat under a backrest shaped to support rather than just to lean on, running to 79 cm from the floor. For a chair with a 64 cm footprint that back height is unusual, and it is the reason the Lina works for an hour of reading rather than ten minutes.

The 68 cm depth gives a proper seat without the deep recline of a lounge chair, so getting out of it is easy — useful beside a bed. Arms sit on both sides at seat level, and the light grey fabric is a flat, everyday weave rather than a pile, so it does not shade or crush where you sit.

Light grey fabric on rubberwood legs

The Lina is upholstered in fabric in light grey over a durable internal frame, and stands on rubberwood legs. Rubberwood is a dense hardwood, which is what lets a slim leg carry a chair without flexing, and the natural finish keeps the timber visible rather than painted out. Light grey is a mid-tone that hides everyday dust better than a cream, and a flat weave means no pile to brush back.

Dimensions & materials

  • Assembled size: 64 W × 68 D × 79 H cm
  • Product weight: 9 kg
  • Upholstery: fabric
  • Legs: rubberwood, natural finish
  • Colour: Light Grey
  • Package contents: 1 × armchair
  • Carton: 66 × 38 × 57 cm, 11 kg

Assembly & delivery

Assembly is required and comes down to fitting the rubberwood legs to the upholstered body. One carton arrives at 66 × 38 × 57 cm and 11 kg, which one adult can carry and which turns a staircase on its 38 cm face. The box contains one armchair. Most orders ship the next business day, with nationwide delivery across New Zealand.

A reading corner in a small bedroom

A small bedroom reading corner is the Lina's job: 64 cm of wall and 68 cm of depth is about as little as a chair can take while still giving a 79 cm back that supports your shoulders. At 9 kg it moves for vacuuming. The trade-off is the seat angle — more upright than a deep lounge chair, so it reads rather than naps.

How much room does the light grey Lina armchair need at 64 × 68 cm?

Seventy-five centimetres of wall and about 40 cm of clear floor in front covers the light grey Lina comfortably — the chair itself is 64 cm across and 68 cm deep. Because it is close to square, it also sits well turned into a corner at 45 degrees, which uses less usable floor than squaring it against a wall.

Is the 79 cm back on the light grey Lina high enough for reading?

Seventy-nine centimetres to the top of the back is tall for a chair with a 64 cm footprint, and it puts the support at shoulder level rather than at the waist. That is what makes the Lina a chair you stay in for a chapter. It is not headrest height, so add a small cushion if you tilt your head back.

What are the legs on the light grey Lina made from?

Rubberwood in a natural finish carries the Lina. Rubberwood is a dense hardwood, so a slim leg can take the load without flexing, and leaving the grain visible keeps the light grey upholstery from reading as a solid block. Check the leg fixings are tight after the first few weeks, as with any leg-on chair.

Does light grey fabric on the Lina need special care?

Light grey on the Lina is a flat woven fabric rather than a pile, so there is no nap to brush back and no pressure shading where someone has been sitting — a practical advantage over velvet or bouclé. Vacuum it with an upholstery head and blot spills rather than rubbing. Mid-grey also hides dust better than a cream would.

What is in the 66 × 38 × 57 cm Lina carton?

One armchair ships in a single carton of 66 × 38 × 57 cm weighing 11 kg, with the rubberwood legs packed separately from the upholstered body. Assembly is required and one person with a screwdriver can finish it. The 38 cm packed thickness is what lets the light grey Lina go up a narrow staircase without a struggle.

Will the light grey Lina suit an apartment where the chair has to move?

An apartment gains a real armchair from a 64 × 68 cm patch of floor with the Lina, and at 9 kg it shifts between rooms or between flats without help. Light grey stays neutral against rental-white walls. Keep the carton if a move is likely, as the legs come off for transport.

Warranty & returns

30-day change of mind

Shop with 30-day change-of-mind returns. Return freight is at your cost; conditions apply.

See return conditions

Here to help

Our team is here for product questions and after-sales support.

Contact our team

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)